Electrical contractor in Anne Arundel County
Permits are pulled before work begins and then inspected by the county. A contractor who files them is working inside a system with an inspector in it, which is what unpermitted work avoids.
Of the permits we observed, 71% are electrical work.
Typical job observed: 140 amp service.
1- client is relocating the service and before bge relocate the meter they need a temporary service.
1- rough-in and install 60 amp/240 volt GFCI protected circuit for outdoor EV charger, trench about 35' from the edge o…
-Rough-in and install a new 80-amp, 240-volt feeder for a hot tub subpanel/disconnect. Install and secure all wiring an…
-service upgrade from 200 amp to 400 amp 2- rough-in and install EV charger one indoor, outdoor. 60'- trech. 1- rough-i…
Rough-in and install 50 amp circuit for a hot tub, with a disconnect.
1- Replace load side service cable. 2- Replace 200 amp main electric panel with a 200 amp emergency disconnect and a 20…
We hold permit records for Anne Arundel County, Baltimore City, Baltimore County, Carroll County, Frederick County, Howard County, Prince George's County, and Washington DC. Work anywhere else is not missing from this contractor's record, it is outside what we cover.
This page shows permits we observed in county records. Our observation is not complete: work done before those dates, in counties we do not cover, or on filings that name no contractor does not appear here. A contractor's real work is almost always greater than what we observed, and absence of a permit on this page does not mean the work was not done or not permitted. We currently hold records for Anne Arundel County, Baltimore City, Baltimore County, Carroll County, Frederick County, Howard County, Prince George's County, and Washington DC; see permit coverage for what that includes.